I have installed Exchange 2013CU7 on Server 2012 R2 in a VM.  I have removed and reinstalled several times and saw this error on each installation.  It happens a few times a day, somewhat randomly.  As far as I can tell nothing is impacted in terms of server function.

Log Name:      MSExchange Management
Source:        MSExchange CmdletLogs
Date:          12/19/2014 1:04:47 AM
Event ID:      8
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      myserver.mydomain.local
Description:
(PID 4064, Thread 136) Task Get-HealthReport throwing unhandled exception: System.ArgumentException: sessionState
   at Microsoft.Exchange.Configuration.Tasks.ExchangePropertyContainer.GetProvisioningBroker(ISessionState sessionState)
   at Microsoft.Exchange.Provisioning.ProvisioningLayer.GetProvisioningHandlersImpl(Task task)
   at Microsoft.Exchange.Provisioning.ProvisioningLayer.GetProvisioningHandlers(Task task)
   at Microsoft.Exchange.Configuration.Tasks.Task.<BeginProcessing>b__4()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeNonRetryableFunc(Action func, Boolean terminatePipelineIfFailed).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="MSExchange CmdletLogs" />
    <EventID Qualifiers="49152">8</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-19T08:04:47.000000000Z" />
    <EventRecordID>347</EventRecordID>
    <Channel>MSExchange Management</Channel>
    <Computer>myserver.mydomain.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data>4064</Data>
    <Data>136</Data>
    <Data>Get-HealthReport</Data>
    <Data>Get-HealthReport</Data>
    <Data>System.ArgumentException: sessionState
   at Microsoft.Exchange.Configuration.Tasks.ExchangePropertyContainer.GetProvisioningBroker(ISessionState sessionState)
   at Microsoft.Exchange.Provisioning.ProvisioningLayer.GetProvisioningHandlersImpl(Task task)
   at Microsoft.Exchange.Provisioning.ProvisioningLayer.GetProvisioningHandlers(Task task)
   at Microsoft.Exchange.Configuration.Tasks.Task.&lt;BeginProcessing&gt;b__4()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeNonRetryableFunc(Action func, Boolean terminatePipelineIfFailed)</Data>
  </EventData>
</Event>

Hi- I'm doing an upgrade/migration from Exchange 2010. Single Site, Single Domain. My Exchange 2013 environment is made up of three Hyper-V guests running on Windows Server 2012 R2. I've created an initial mailbox on Exchange 2013 and have migrated two mailboxes from 2010.

The issue is that I can't log into Outlook unless I do one of two things:

1. Add a registry entry to HKCU\Microsoft\Exchange\Exchange Provider\ to define the DS Server, or

2. When I go into the Outlook Profile on the PC and change the connection settings to Connect to Microsoft Exchange using HTTP

It's my understanding that Outlook should log in automatically by using Autodiscover. But I'm using the same namespace for my 2013 install so how do I differentiate between the old 2010 server and the new2013 server?

Thanx

You should never, never doubt what nobody is sure about. -Willy Wonka

Hi,

Any body can help I am unable to access public folder in outlook 2016 from exchange 2013.

Regards,

Mohammed Afzal Ahmed

We are seeing devices listed in ActiveSync that are showing up as strange model numbers. For instance we have users showing model 7C1, 7C2, 8C1 and 8C2. This is causing problems with our MDM software. 

Can anyone explain why it is reporting models that do not yet even exist?!?  We are running Exchange 2010 on RU9.

John M. City of Denver

John M.

As an example my Director wants cascading low disk space alerts setup for Exchange, such as;

An alert at 10% or 100GB, if not resolved then

An alert at 9%  or 90GB, if not resolved then

An alert at 8%  or 80GB, if not resolved then

an so on.

Can't seem to get this in OpsMngr2012 where it will send multiple alerts. They have to be resolved. Exchange has the built-in Server Health monitors, but again it will alert on one value.

Any ideas on what would work?

I'm exporting some MBs to PST and I'm getting these events on our Exchange 2013 server where the mailboxes are. We still have some Exchange 2010 servers in our site and it appears that the process is looking for a Discovery mailbox. 

Orange County District Attorney

Since I updated from Exchange Server 2013 Enterprise SP1 to CU10 I cannot access eac any more.

Powershell exchange work well and I can configure the server owa virtual directory is accessible no problems as long as I not want to create a rule, then I get the same error as when try to access ecp

I get Login Screen for EAC and after Login I get following error

Server Error in '/ecp' Application.

---

Could not load type 'RbacQueryProcessor' from assembly 'Microsoft.Exchange.Configuration.ObjectModel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.TypeLoadException: Could not load type 'RbacQueryProcessor' from assembly 'Microsoft.Exchange.Configuration.ObjectModel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.

Source Error:

[TypeLoadException: Could not load type 'RbacQueryProcessor' from assembly 'Microsoft.Exchange.Configuration.ObjectModel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.]
   Microsoft.Exchange.Management.ControlPanel.RbacModule.RegisterQueryProcessors() +0
   Microsoft.Exchange.Management.ControlPanel.RbacModule.Init(HttpApplication application) +106
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +530
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475

[HttpException (0x80004005): Could not load type 'RbacQueryProcessor' from assembly 'Microsoft.Exchange.Configuration.ObjectModel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12618980
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12458597

In Event Viewer I have many messages like this

Event code: 3005 
Event message: An unhandled exception has occurred. 
Event time: 14-01-2016 2:15:43 PM 
Event time (UTC): 14-01-2016 7:15:43 AM 
Event ID: aba7db1a72794748a1b68ec21e9f9828 
Event sequence: 2 
Event occurrence: 1 
Event detail code: 0 

Application information: 
    Application domain: /LM/W3SVC/2/ROOT/ecp-296-130972293405885864 
    Trust level: Full 
    Application Virtual Path: /ecp 
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp\ 
    Machine name: MAILBLABLA 

Process information: 
    Process ID: 52736 
    Process name: w3wp.exe 
    Account name: NT AUTHORITY\SYSTEM 

Exception information: 
    Exception type: TypeLoadException 
    Exception message: Could not load type 'RbacQueryProcessor' from assembly 'Microsoft.Exchange.Configuration.ObjectModel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
   at Microsoft.Exchange.Management.ControlPanel.RbacModule.RegisterQueryProcessors()
   at Microsoft.Exchange.Management.ControlPanel.RbacModule.Init(HttpApplication application)
   at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers)
   at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context)
   at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context)
   at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)



Request information: 
    Request URL: https://mail.blabla.com:444/ecp/ 
    Request path: /ecp/ 
    User host address: fe80::6193:f59d:11fd:5e17https://mail.blabla.com:444/ecp/ 
    User:  
    Is authenticated: False 
    Authentication Type:  
    Thread account name: NT AUTHORITY\SYSTEM 

Thread information: 
    Thread ID: 242 
    Thread account name: NT AUTHORITY\SYSTEM 
    Is impersonating: False 
    Stack trace:    at Microsoft.Exchange.Management.ControlPanel.RbacModule.RegisterQueryProcessors()
   at Microsoft.Exchange.Management.ControlPanel.RbacModule.Init(HttpApplication application)
   at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers)
   at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context)
   at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context)
   at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)


Custom event details: 

the logmessages is the same just the User Host Address vary in the appearing messages

Request information: 
    Request URL: https://localhost:444/ecp/exhealth.check 
    Request path: /ecp/exhealth.check 
    User host address: 127.0.0.1 
    User:  
    Is authenticated: False 
    Authentication Type:  
    Thread account name: NT AUTHORITY\SYSTEM 

or

Request information: 

    Request URL: https://localhost:444/ecp/exhealth.check 
    Request path: /ecp/exhealth.check 
    User host address: ::1 
    User:  
    Is authenticated: False 
    Authentication Type:  
    Thread account name: NT AUTHORITY\SYSTEM 

I recreated ecp virtual directory several times, restarted the server but still get the same error. Search on internet not give me hits for my specific TypeLoadException  Could not load type 'RbacQueryProcessor' ....... connect to owa website work without problems

Dear all,

while in Exchange admin center, I get error page 500 return after i select group and hit edit in recipients option. 

Do any one have a solution? thanks

Regards,

wc

I just installed Microsoft Exchange Server 2013 onto a Microsoft Server 2012 and I'm unable to get to the management console.

When I tried this, https://<servernameFQDN>/ecp it fails with

HTTP Error 404.0 - Not Found

The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.

Detailed Error Information:

Module  IIS Web Core

Notification  MapRequestHandler

Handler  StaticFile

Error Code  0x80070002

Requested URL  https://<servernameFQDN>:443/ecp

Physical Path  C:\inetpub\wwwroot\ecp  (this part is of special focus because no such directory exists)

Logon Method  Anonymous

Logon User  Anonymous

There are two "web sites" on that IIS server; Default and Exchange Backend. Ports used for Default are 80 and 443. Ports used for Exchange Backend are 81 and 444. I've made NO post-installation configuration changes. Everything is exactly as the Exchange Installation set it to. During installation, everything was left at the default settings except one item; the installation target path was changed from using drive "C:" to drive "E:", which is using the ReFS file system.

If I attempt to go to https://<servernameFQDN:444>/ecp I get to the login screen, as I should. But when I login, I'm taken to Outlook Web App.

Exploring IT...

I regularly see the following error on my Exchange servers:

RunspaceId              : 0ffa50a4-3a83-45ed-8f30-25aadba55c3e
Server                  : ex13-db2
CurrentHealthSetState   : NotApplicable
Name                    : Mapi.Submit.Monitor
TargetResource          : MailboxTransport
HealthSetName           : MailboxTransport
HealthGroupName         : ServiceComponents
AlertValue              : Unhealthy
FirstAlertObservedTime  : 10/11/2015 2:52:29 PM
Description             :
IsHaImpacting           : False
RecurranceInterval      : 0
DefinitionCreatedTime   : 10/9/2015 7:50:17 PM
HealthSetDescription    :
ServerComponentName     : None
LastTransitionTime      : 10/11/2015 2:52:29 PM
LastExecutionTime       : 10/19/2015 10:15:35 AM
LastExecutionResult     : Succeeded
ResultId                : 129414608
WorkItemId              : 320
IsStale                 : False
Error                   :
Exception               :
IsNotified              : False
LastFailedProbeId       : 65
LastFailedProbeResultId : 67891150
ServicePriority         : 2
Identity                : MailboxTransport\Mapi.Submit.Monitor\MailboxTransport
IsValid                 : True
ObjectState             : New

While this post:
https://www.gavin.pro/2015/08/26/exchange-2013-mapi-submit-monitor/

says you can safely ignore and override this monitor, I have not been able to do so. This is particularly frustrating because our SCOM server catches these alerts and shows our Exchange servers as unhealthy.

I ran the following command to override it:

[PS] C:\Windows\system32>Get-GlobalMonitoringOverride | fl

RunspaceId         : 0ffa50a4-3a83-45ed-8f30-25aadba55c3e

ItemType           : Monitor

PropertyName       : Enabled

PropertyValue      : 0

HealthSetName      : MailboxTransport

MonitoringItemName : Mapi.Submit.Monitor

TargetResource     :

ExpirationTime     : 10/17/2016 10:15:52 AM

ApplyVersion       : Version 15.0 (Build 1104.5)

CreatedTime        : 10/18/2015 10:16:02 AM

Identity           : MailboxTransport\Mapi.Submit.Monitor

IsValid            : True

ObjectState        : New

But the alert still returns.

I have tried overriding the Responder instead of the Monitor:

Add-GlobalMonitoringOverride -ItemType "Responder"

but the state is still unhealthy.

Any advice? Thanks!

Hi,

Recently i created a child domain on windows server 2012 and exchange server 2013 installed on the same server.

the root domain is "domain.com" and child domain is sam.domain.com 

when i open ecp https://sam.domain.com/ecp after login with admin its  never show full features of administrator and at same time when i open the https://domain.com/ecp (root domain) to create users for sam.domain.com users. it never allows me and the existing users on child domain contain the following UNC - jack@domain.com instead of jack@sam.domain.com 

waiting for reply 

Jay Kumar

We're exploring the available exchange reporting tools, and would like to confirm if the below information are being stored/kept on the exchange 2013, or available for retrieval:

• Client data capturing (when sending/receiving emails from mobile, PC, OWA).
• Daily message attachment statistics.
• Mailbox permission changes.
• Unauthorized mailbox login.
• Daily mailbox login and logout.
• User's action on mailbox storage.Include any changes in certain mailbox's storage.
• Exchange change audit logs.

I tried to update body of an item using EWS, however, I get the following error:

Exception calling "Update"with"1" argument(s):"The invalid value '' was specified for the 'Body' element."FullyQualifiedErrorId:ServiceXmlSerializationException

Steps to reproduce problem:

$item.Body.Text = 30 -as [char]
$item.Update("AlwaysOverwrite")

Cause of error is usage of control characters (File, Group, Record, and Unit: FS, GS, RS and US).

Hi,

I have a problem where Event ID 3028 Source MSExchangeApplicationLogic is beeing logged every 6 hours with 4 same type of events. Here is the log:

Scenario: ProcessKillBit. Failed to read killbit list file because of exception System.IO.IOException: The process cannot access the file 'C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\prem\15.0.995.29\ext\killbit\killbit.xml' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.Open(String path, FileMode mode, FileAccess access, FileShare share)
   at Microsoft.Exchange.Data.ApplicationLogic.Extension.KillBitHelper.TryReadKillBitFile(Int32& refreshRate, DateTime& lastModifiedTime)

The environment is single virtual MS Exchange 2013 server running on Windows 2012 R2. DC is running on a separate server.

I can't seem to find any articles or blogs relating to this issue.

Thanks for any help.

Good afternoon!

It's time to rotate all the Admin passwords.  However, my new Exchange 2013 infrastructure adds some complexity to the mix.

Specifically, what effect would changing the Admin password on the Edge Transport have?  There are two, and they are in a Workgroup.  

I don't recall any Active Directory credentials in the setup, but I might have misplaced that particular note.

Any thoughts on this?  Should be no noticeable effect, but......

Thanks!

Gregg

Dear all,

we are currently running Exchange Server 2010.

I often have a request from users to delete the email that they have accidentally sent out and failed to recall from specific mailboxes. may I know whether any command that I could run? Maybe it is best that we can delete based on subject name or maybe based on sender name within specific period of time.

Please advise.

Thanks.

Hello,

issue is described briefly in https://social.technet.microsoft.com/Forums/en-US/0c1d3936-beb4-40b8-afaa-5bcdd7196d3a/lsassexe-consuming-too-much-cpu-same-as-httpssupportmicrosoftcomenuskb2500682-but-our-dc?forum=winserverDS

Problem is that LSASS is high because of NSPIBind process.

Exchange is constantly quering for address books and address lists, and unsure how to make this ldap queries lighter.

LDAP queries go to:

There are a lot of search requests done every second - over 67 a second done to the CN=Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=organization,DC=priv, and a lot of others.

There are 81 deep requests (over the entire AD tree) done every second.

We have many address lists, and address books, i see too many queries going in that direction.

Any hint is more then welcome! 

Thanks!